Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for OLDE MIDWAY P1000
Summary of Contents for OLDE MIDWAY P1000
- Page 1 10oz Popcorn Popper INSTRUCTION P1000/P1050 MANUAL Page | 1...
- Page 2 WARNING Misuse of this machine may result in serious injury. READ ALL INSTRUCTIONS BEFORE USING YOUR POPCORN MACHINE. RETAIN THIS MANUAL FOR FUTURE REFERENCE. • This is not a toy. Please keep away from children. • Use only on a grounded outlet. •...
-
Page 3: Parts List
Parts List Note: Identify and locate all parts and hardware necessary to operate this item. Main Unit Kettle Popcorn Accessories Popcorn Bags ** 60-Watt R20 Light Bulb (not shown) also included. ** If your model does not include the cart, skip to page 10. We recommend two people for cart assembly. - Page 4 Parts List (cont.) Working Platform Cabinet Back Working Platform Push Handle Brackets (Large) (I) - 1pc (J) - 1pc (L) - 1pc (K) - 2pc Handrail Handrail Brackets (Small) (N) - 1pc (M) - 2pc HARDWARE Screwdriver (1pc) & Wrench (2pc) also included. Wheel Bolt M8x1 Nyloc Nut M8 Nut M8...
- Page 5 Parts List (cont.) Page | 5...
- Page 6 Popcorn Cart Assembly STEP 1: Screw one of the RUBBER FEET (A) into the bottom of each SUPPORT LEG (B). Tighten both rubber feet. STEP 2: Insert one WHEEL BOLT (O) into the bottom holes located on each side of the SUPPORT STAND (C). NOTE: Insert bolt from the inside out.
- Page 7 Popcorn Cart Assembly (cont.) STEP 6: Insert both HORIZONTAL SUPPORTS - WITH SCREWS (F) into the grooves at the ends of each SUPPORT STAND (C), as shown. STEP 7: Insert the CABINET BASE (G). Note: Place the lipped side facing down.
- Page 8 Popcorn Cart Assembly (cont.) STEP 9: Note: Before assembling the front and back panels, determine which side you want the cabinet door facing. Insert the CABINET FRONT (H) and CABINET BACK (I). Secure both panels to the SUPPORT STANDS (C) with SCREWS (V), as shown. Tighten screws with screwdriver.
- Page 9 Popcorn Cart Assembly (cont.) STEP 11: Remove the pre-assembled screws from the HANDRAIL (N). Attach one of the HANDRAIL BRACKETS (M) to one end of the handle. Insert the screw and tighten. Repeat step above to attach the remaining bracket on the other side.
-
Page 10: Initial Setup Instructions
Initial Setup Instructions 1. Set popcorn popper on a level, dry surface. Gently squeeze the sides of the Olde Midway front metal panel to detach, then remove all packing material and wipe inside of kettle and popper with a dry cloth. (Fig. 1) DO NOT use harsh cleaners or abrasive chemicals. After the initial setup, maintain a regular care and maintenance plan. - Page 11 Operating Instructions Fig. 2 - Add Kernels Fig. 1 - Add Oil Fig. 3 - Press STIR Fig 4 - Dump Kettle STEP 1: Plug into a grounded 120v electrical outlet only. If using an extension cord, make sure it’s out of the way to prevent tripping.
-
Page 12: Cleaning And Maintenance
Cleaning & Maintenance It is recommended that the machine and kettle be cleaned after each use when the popper has cooled. However, waiting to clean after a few popping sessions is acceptable. • Make sure all controls (WARM, STIR, KETTLE) are OFF and the popcorn machine is unplugged and cool. - Page 13 Seasoning Recipes Mix measurements suggested for 8-16 cups popped corn, according to taste. Bacon Parmesan Pizza 1/2 cup iodized salt 1 tablespoon Parmesan cheese 1/4 cup cooked bacon bits 1/2 teaspoon dried oregano 1/4 cup grated parmesan cheese 1 pinch of red pepper flakes. Combine and sprinkle over popcorn, then toss.
Need help?
Do you have a question about the P1000 and is the answer not in the manual?
Questions and answers