Onkyo DV-C601 Instruction Manual page 15

1 2 3
4 5 6
7 8 9
+10 0
REMOTE CONTROLLER
5
Press the
PLAY
The DVD Changer starts playback.
If you have inserted a DVD video with a title menu or a Video
CD with PBC (Playback Control) functionality, a menu screen
or
may appear. See "Direct Playback via the On-Screen Menu" on
page 16.
PLAY
To start playback of a PBC-equipped VIDEO CD from the
menu screen, set "PBC" to "ON" via the on-screen menu
function. See page 38.
Inserting other discs
1. Press the OPEN/CLOSE button to open the disc drawer.
2. Press the DISC SKIP button on the main unit repeatedly until the
disc you wish to replace can be accessed.
3. Remove the disc you wish to replace, and insert another disc.
4. Press the OPEN/CLOSE button again to close the disc drawer.
Note:
You can also press the PLAY button to automatically close the
drawer and start playback of the disc that is currently up front. To
start playback of another disc than the one in the front tray, you first
need to close the disc drawer.
Selecting the desired disc for playback
Press one of the DISC 1–6 buttons on the main unit or on the remote
controller. The DV-C601 starts playing the first title of the selected
disc. There is no need to press the
<main unit>
1 2 3 4 5
DISC DISC DISC DISC DISC
Notes:
• If you select the desired disc using one of the DISC
1–6 buttons while the DVD Changer is playing back a title of another
disc, playback starts with the first title of the newly selected disc.
• You can also press the DISC SKIP button on the unit or DISC +/– but-
ton to jump to the disc in the next tray (or from tray #6 to tray #1 if the
disc in tray #6 is currently being played back). In that case playback
will start with the first title of the disc in the newly selected tray.
• If you select the desired disc by pressing the DISC SKIP button
while the DVD Changer is stopped, press the
to start playback of the first title of the selected disc.
The FIRST SETUP screen
The FIRST SETUP screen is only displayed the very first time you
switch on your DV-C601. This page allows you to set the two single
POWER
OPEN/CLOSE
PLAY
PAUSE
STOP
MENU
ENTER
/ / /
TOP MENU
+
DISC /
—
RC - 425 DV
PLAY button.
PLAY button.
<remote controller>
DISC 1 DISC 2 DISC 3
6
DISC
DISC 4 DISC 5 DISC 6
PLAY button
To obtain a higher picture quality
Occasionally, some picture distortion not usually visible during a normal
telecast may appear on the TV screen during playback of a DVD video. This
is due to the fact that DVD videos provide a higher resolution and therefore
also more data to process. While the amount of noise depends on the TV you
connect the DVD Changer to, reducing the sharpness setting on your TV
when viewing DVD videos may alleviate the problem.
DVD VCD CD
About the
DVD VCD CD
The icons on the heading bars below show the discs that
support the function described in the section in question.
DVD
: This function is available for playback of DVD videos.
VCD
: This function is available for playback of VIDEO CDs.
CD
: This function is available for playback of audio CDs.
most important parameters. Note that you can change these settings
any time by selecting the appropriate on-screen menu function. See
also page 34, 35.
1. Check the video connection of the DVD Changer to your TV
set (see page 10 and following) and switch on your TV.
2. Switch on the DVD Changer.
The following menu screen page
is displayed:
3. Press the remote controller's
or button to select "On-Screen
Language" and press the
ENTER button.
You can select one of the
following languages: ENG
(English), FRE (French), or
SPA (Spanish). That language
will be used on all on-screen
menu pages and for subtitling. See
page 35.
4. Select the desired language using the
confirm by pressing ENTER.
Note:
If you agree with the currently selected language, just press ENTER
without changing the setting.
5. Press the button to select the "TV Shape" function and
confirm by pressing ENTER.
This function allows you to specify the picture size of your
TV. See 35 for details.
6. Use the and buttons to specify the screen size and
confirm by pressing ENTER.
7. Press the SETUP button to store your settings.
The settings are stored and you are returned to the FIRST SETUP
screen page. As stated above, you can also change these settings
at a later stage. See page 32.
symbols
DVD
Notes:
• For PBC (Playback Control) of VIDEO
CDs, see "About VIDEO CDs" on page 9.
• Depending on the DVD video you are
using, you may need to press the TOP
MENU or MENU button to display the
menu screen.
Thank you for your purchase of
our DVD-Video Player.
Please make a selection for
On-Screen Language and your TV shape
and press ENTER button on your remote control.
FIRST SETUP
On-Screen Language
TV Shape
<remote controller>
To select the items
on the screen.
ENTER
After selecting an
item, confirm your
choice by pressing
ENTER.
or button and
VCD CD
ENG
4:3LB
15