Canceling Security Setting After Arrival (Residential/Tenant Station); Canceling Security Alarms (Residential/Tenant Station) - Aiphone GT-2C-L/GT-2C Operation Manual

USING THE STATION
7-5

Canceling security setting after arrival (Residential/tenant station)

1
When the ABSENCE SECURITY setting in
individual door is opened, a screen will display and the alarm
will sound.
• At this time, operation other than an emergency alarm cannot be
performed. Ex.: When a call is made from the entrance station,
communication will not start. (The residential/tenant station is in
occupied mode.)
• Even if the call tone volume is set to 0 (OFF), it will sound at level 10
(HIGH) volume.
2
Press the [ REC/PLAY] to display the security PIN input
screen. Input the security PIN by pressing the [], [], [], and
[] buttons.
• When a security PIN is not used, press the [
to cancel the setting.
7-6

Canceling security alarms (Residential/tenant station)

1
When the PRESENCE SECURITY setting in
individual door is opened, the security screen will display and the
alarm will sound.
When ABSENCE SECURITY is set, the security screen will
display and the alarm will sound after the DEPARTURE TIMER
or ARRIVAL TIMER has elapsed.
• Alarms will also sound at individual door stations, and the illuminator
LED will flash.
• Even if the call tone volume is set to 0 (OFF), it will sound at level 10
(HIGH) volume.
2
Press the [ REC/PLAY] button or the [
• The alarm sound will stop.
is set, if an
7-4
REC/PLAY] button
is set, if an
7-4
SENSOR1 ACTIVATED.
STOP
OFF] button.
3
The setting will be canceled when the security PIN is correct.
• If the security PIN is not correct, "WRONG SECURITY PIN." will
display.
• There is no limit to the number of times the PIN can be entered, but if
a correct security PIN is not entered within the set delay time ( 8-9
DEPARTURE TIMER, ARRIVAL TIMER setting), a security alarm
sounds.
3
Press the [ REC/PLAY] to display the security PIN input
screen. Input the security PIN by pressing the [], [], [], and
[] buttons.
• When a security PIN is not used, press the [
restore.
4
Restoration occurs when the security PIN is correct.
• If the security PIN is not correct, "WRONG SECURITY PIN." will
display.
• Depending on the settings at installation, an alarm may be output to a
guard station.
- 20 -
REC/PLAY] button to