F.a.q - Technotape HPM.MUG.350.005 User Manual

F.A.Q.

The transferred image is a little too light.
First, lengthen the sublimation time. If that doesn't work,
raise the temperature with 3°C. The last option is to give the
press more pressure.
The transferred image is a little too vague.
Reduce the sublimation time with 10 seconds.
The transferred image is not brilliant.
Reduce the pressure or reduce the temperature.
The transferred image is partial vague.
The sublimation paper did not make contact with the
product completely. Usually this means that the surface of
the product is not completely smooth.
The paper is sticky.
The temperature is either too high or the sublimation paper
is of poor quality.
The edges of the mug color brown.
Reduce the sublimation time with 20 seconds.
Sublimation Mug 11oz White
Dishwasher & Microwave Safe
Itemcode
SPM.082.096.002
6
PRODUCTION TIPS!
For the best result of ceramic products, dip
the product immediately into cold water after
sublimating.
To release the Technotape Heat Transfer Tape easily,
double fold one end of the tape.
Use very clean products only to prevent dust to
obstruct clear transfer.