Accessories; Changing Accessories; Mugpress Accessories - Technotape HPM.MUG.350.005 User Manual

ACCESSORIES

CHANGING ACCESSORIES

Before you change any accessory, make sure the
power is switched off and the press is cooled down.
Release the safety catch (Picture E).
Unplug the cable.
Carefully remove the cable from the heating mat cable
clamp (Picture F).
Remove the heating mat from the holder and replace it by
another mat.
Do not bend or fold the heating mats.
Carefully connect the cable to the heating mat cable clamp
and plug the cable into the control box.
PICTURE E
Safety catch

MUGPRESS ACCESSORIES

There are different accessories available for the mug press:
Heating Mat
Ø7,5 - 9,5 cm
Description
For 10oz and bigger mugs
Standard installed
Itemcode
HPM.MUG.350.S15
Heating Mat
Ø7,0 - 8,0 cm
Description
For 8oz and smaller mugs
available separately
Itemcode
HPM.MUG.350.S16
PICTURE F
Cable clamp 1
Cable clamp 2
Subpreme Mug Paper
110 gr/m²
Description
238 x 98 mm
250 sheets
Itemcode
TRP.SRA.MUG.001
Tape
Heat Resistant
Description
10 mm x 66 m
20 mm x 66 m also available
Itemcode
HTT.010.066.201
5