Garmin GPS 400 Pilot's Manual & Reference page 150

SECTION 8
AUX PAGES
Utility Page: Checklists
Creating a checklist:
1) Select 'Checklist' from the Utility Page (Figure
8-33), using the steps described at the
beginning of this section (8.3). Press the ENT
Key to display a list of checklists.
Figure 8-33 Checklists Highlighted
2) Press the MENU Key to display an options
menu. Turn the large right knob to select
'Create New Checklist?' and press the ENT
Key.
3) Use the small and large right knobs to enter
the name of a checklist. Press the ENT Key
when finished. (Up to nine different checklists
can be created and stored in the GPS 400.)
4) Use the small and large right knobs to enter
each checklist item, followed each time by the
ENT Key. Each checklist may contain up to 30
line items of as much as 16 characters long.
8-14
Executing a checklist:
1)
2)
Figure 8-35 Desired Checklist Item Highlighted
Editing a checklist:
1)
2)
GPS 400 Pilot's Guide and Reference
With the Checklists Page displayed (Figure
8-34), turn the large right knob to select the
desired checklist and press the ENT Key.
Figure 8-34 Desired Checklist Highlighted
As each checklist item is completed, press the
ENT Key to move to the next item on the list
(Figure 8-35).
With the Checklists Page displayed, turn the
large right knob to select the desired checklist
and press the ENT Key.
Press the MENU Key to display an options
menu. Select 'Edit Item?' and press the ENT
Key, then use the small and large right knobs
to edit each checklist item. Press the ENT Key
when finished.
190-00140-60 Rev. H