About Mydashboard; Setting Up Mydashboard - Garmin nuvi 2250LT Quick Start Manual

2. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
3. If you are using a traffic receiver
in Europe, connect the external
antenna to the traffic receiver and
secure it to the windshield using
the suction cups.
After the device has been connected
to vehicle power, the following
should occur.
• The device turns on.
• The device acquires satellite
signals. When at least one of the
bars is green, your device has
acquired satellite signals.
NOTE: The device may need a
clear view of the sky to acquire
satellite signals.
• The device charges as you drive.
in the status bar indicates the
status of the internal battery.
4

About myDashboard

You can use myDashboard to register
your device, check for software and
map updates, access manuals, contact
product support, and more.
For more information, go to
.garmin.com/dashboard.

Setting Up myDashboard

1. Connect the USB cable to the
USB connector on the device.
2. Connect the USB cable to the
USB port on your computer.
3. Double-click
myDashboard Web page.
NOTE: If
you are using Windows 7 or a
Mac computer, go to
®
.garmin.com/agent.
4. Follow the on-screen instructions.
nüvi 2200 Series Quick Start Manual
www
to open the
does not open, or
www