Advertisement
DS4830 EV Kit Getting Started Guide
Thank you for evaluating the DS4830 optical microcontroller. The first step in evaluating the
DS4830 is to setup and run the demonstration. When you are ready to begin developing your
own firmware, additional tutorials will guide you through the installation and use of IAR
Embedded Workbench. The included CD-ROM contains all of the files necessary to use the
DS4830 EV Kit. As these files may change, please check our ftp site for any updates to these
files.
ftp://ftp.dalsemi.com/pub/system_extension/EVKits/
Equipment Needed:
3.3V (2 A) DC Power Supply
•
PC (Windows 2000 / XP / 7 operating system) with an available USB and serial port
•
Maxim Integrated Products
www.maxim-ic.com
DS3900
DS4830
DS4830
/
Advertisement
Table of Contents
Related Manuals for Maxim DS4830
Summary of Contents for Maxim DS4830
- Page 1 IAR Embedded Workbench. The included CD-ROM contains all of the files necessary to use the DS4830 EV Kit. As these files may change, please check our ftp site for any updates to these files.
- Page 2 Installing Files for DS4830 EV Kit From the CD, run DS4830 EVK Setup.exe. This will create a directory called “DS4830 EV Kit” on your PC’s desktop and copy the documentation and files necessary to evaluate the DS4830 to this directory.
Need help?
Do you have a question about the DS4830 and is the answer not in the manual?
Questions and answers