Table of Contents
Advertisement
________________________WARNING __________________________
In the following step, use sufficient personnel to move the cabinet off the
pallet. The cabinet weighs 80.74 kg (178 lb) empty, and can weigh up to
420.94 kg (928 lb) fully configured.
If equipment is installed in the cabinet, the cabinet may become top heavy
and could accelerate rapidly down the ramps if not restrained. Be prepared
to guide and control the motion of the cabinet.
____________________________________________________________
9. Refer to Figure 2-3 and roll the cabinet down the ramps using sufficient personnel for
safety.
10. Wheel the cabinet to the desired location.
11. Adjust the leveler feet downward so that the cabinet is level and the load is removed
from the casters.
_________________________ Caution ___________________________
Ensure that the leveler feet extend enough to carry the load of the cabinet so that
the casters spin freely. If not, damage to the casters will result over an extended
period of time.
____________________________________________________________
H9A11 Cabinet Installation/Owner's Guide 2–7
Installation
Advertisement
Table of Contents
