Table of Contents
Advertisement
6. Refer to Figure 2-2. Remove the four shipping bolts
four cabinet leveler feet
__________________________ Note _____________________________
The ramps attach to the front of the pallet. Therefore, the cabinet will have to be
rolled frontwards down the ramps.
____________________________________________________________
¡
7. Remove the ramps
from the shipping carton and set the ramps in the holes
provided at the front of the pallet
pallet arrows
as shown in Figure 2-2.
_________________________ Caution ___________________________
In the next step, the leveler feet must be fully retracted to prevent contact with the
ramp or the floor when the cabinet is unloaded from the pallet.
____________________________________________________________
8. Adjust the four cabinet leveler feet
maximum upward position.
œ
to the pallet
.
œ
. Ensure that the arrows
and the leveler foot on the stabilizer bar
H9A11 Cabinet Installation/Owner's Guide 2–5
Installation
ž
Ÿ
and brackets
that secure the
¢
on the ramps match the
‘
to the
Advertisement
Table of Contents
