Klarstein FARGO Manual page 31

INSTALLATION
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit
on something solid so that it will not slip during the door removing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It's better that 2 people handle the unit during assembly.
1
Remove the top right
hinge cover.
2
Undo the screws. Then
remove the hinge
bracket.
4
Move the cover from the left side to the
right side. Lift out the door at the top
and place it on a soft surface.
3
Remove the top left
screw cover.
EN
31