Compaq 64-Bit Installation Manual page 40

7-4 Compaq StorageWorks 64-Bit/66-MHz Fibre Channel Host Adapter Installation Guide
Installing Linux Fibre Channel Driver for
Red Hat 7.0
The FC-AL driver (cpqfc.o) is already installed in the operating system.
NOTE:
To install the fibre channel driver, follow the instructions below:
1. Type the following instructions into the command screen:
cd /lib/modules/2.2.16-22/scsi
Press Enter. Next, type the following:
2.
insmod cpqfc.o
Depending on your configuration, driver may require up to thirty seconds to
initialize.
To create a file system:
1. At the /root directory prompt, type
Answer Yes to the question that appears.
2. Make a directory at the /root prompt by typing
and press Enter.
3. At the /root prompt, type
Repeat this step for each volume or logical drive ( the next volume will be sdc,
sdd, sde...).
mke2fs /dev/sdb
mkdir /(your directory name)
mount /dev/sdb /(your directory name)
and press Enter.