Compaq 64-Bit Installation Manual page 25

4-2 Compaq StorageWorks 64-Bit/66-MHz Fibre Channel Host Adapter
Driver Installation from the RA4100 SAN Solution
Support Software CD
Driver Installation from the Compaq SmartStart
and Support Software CD
driver in an existing Windows NT 4.0 server with a 64-Bit/66-MHz Fibre
Channel Host Adapter.
The latest drivers and support files for Windows NT are located on the
RA4100 SAN Solution Support Software CD. To install the drivers from the
RA4100 SAN Solution Support Software CD, follow the instructions found
inside the CD-ROM sleeve.
NOTE: Compaq SmartStart and Support Software CD with a higher revision number than
the RA4100 SAN Solution Support Software may contain an updated version of RA4100
SAN Solution software.
Use the following steps to install or update the Microsoft Windows NT
drivers:
Use the following steps to install or update the Windows NT drivers:
1. Insert the SmartStart and Support Software CD. If you have enabled
AutoPlay, the System Utilities window appears.
2. Select I Agree box and click the OK button.
3. The pop-up System Utilities window appears with 2 options, as shown
in the figure below.