Control Panel Functions - American Standard LIBERATION Owner's Manual

Walk-in bath
Table of Contents

Advertisement

Control Panel
Control Panel Operation
Jets: Push this button once to
activate the water jets. If the
leg valve is turned off , all of the
jets will expel water. Once the
leg valve is turned on, only the
lower jets will expel water. Push
once more to turn off .
Lights:
There
options that are available with
the Liberation walk-in bath.
Push the button to select the
desired color. The last setting
will scroll through each color
automatically.
Functions
are
7
light
6
Air: Push this button once to
activate the heated blower
at high speed. To adjust the
speed to medium or low, push
and hold the button. Push
again to turn the air jets off .
Drain: If your walk-in bath is
equipped with the Quick Drain®,
open
the
traditional
system (turn the overfl ow) and
then press the Drain button to
activate the drain. When the
water falls below the suction
guard, press the button again
to turn off . The Quick Drain® will
automatically shut off after 3
minutes as a safety feature.
drain

Advertisement

Table of Contents
loading

Table of Contents