Open & Close Walk-In Bath Door - American Standard LIBERATION Owner's Manual

Open & Close
Walk-In Bath Door
How to Open and Close the Door
To enter your Liberation walk-in bath, reach into the inside of the bath
and pull the handle until it is vertical with the side of the bath. Push
the door open and enter carefully. To close the door securely, simply
close the door and place the lever in the down position. Do not apply
excessive pressure when placing the handle in the close position. Fill
the bath above the highest jet before activating the whirlpool pump (if
equipped). Do not put weight on the door when entering and exiting the
walk-in bath. It is recommended to leave the door in the open position
when the walk-in bath is not in use.
Close
Open
7