Epson ActionDesk 4000 User Manual page 27

When the computer completes its testing, it displays a screen
describing the system's configuration. If necessary, press
the Pause button on the keyboard to view the configuration
screen. After viewing the screen, press any key to continue
the startup process.
5. If necessary, use the controls on your monitor to adjust the
brightness and contrast until you can easily see the
characters on the screen. If your monitor has horizontal and
vertical hold controls, you may need to use them to
stabilize the display.
If your system is configured to automatically load a program
(such as Microsoft Windows or a word processing
program), you see the first menu or screen display of that
program. If not, you may see the operating system prompt,
such as C:\>orA:\>.
If there is no operating system installed on your computer,
you see an error message. Ignore the message for now; once
you install the operating system, you will not see this
message.
Now you need to run the SETUP program to make sure your
computer is configured properly. First turn off the computer, as
described below, then see Chapter 2 for instructions. When you
finish running SETUP, be sure to see "Post-SETUP Procedures"
on page 2-12 for guidelines on what you need to do next.
Setting Up Your System
1-9