Camera
Removing camera
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
c.
WLAN card
d.
WWAN card (optional)
e.
display hinge cover
f.
display assembly
g.
display bezel
h.
display panel
3. To remove the camera:
a. Disconnect the camera cable from the connector on the camera module [1].
b. Carefully pry and lift the camera module from the display back cover [2].
Installing camera
1. Insert the camera into the slot on the display back cover.
2. Connect the camera cable to the connector on the camera module.
3. Install the :
Before working inside your
computer.
Removing and installing components
49