4. Install the:
a.
battery
b.
base cover
5. Follow the procedure in
Display assembly
Removing display assembly
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
c.
WLAN card
d.
WWAN card (optional)
e.
display hinge cover
3. To disconnect the display cable:
a. Release the WLAN and WWAN cables from the routing channels [1].
b. Remove the two (M2x3) screws that secure the display cable bracket in place [2].
c. Remove the display cable bracket that secures the display cable from the system [3].
d. Disconnect the display cables from their respective connectors on the system board [4,5].
e. Remove the single screw that secure the power connector bracket and also the display cable to the system [6].
4. To release the display assembly:
a. Remove the two M2x5 screws that secure the display assembly to the computer [1].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
41