Toshiba B-EP4DL-GH20-QM-R Owner's Manual page 11

 Serial (RS-232C) (B-EP4DL-GH20-QM-R)
1. Connect the serial interface cable to the RS-232C
port on the printer.
2. Connect the other end of the serial interface
cable to the host.
3. Turn on the printer and the host and send data
from the host to the printer.
NOTE:
For details of the interface cable, please consult the
nearest Toshiba Tec representative.
 Wireless (B-EP4DL-GH32-QM-R, B-EP4DL-
GH42-QM-R)
1. In the case of Bluetooth, place the printer within 3
m from the host.
In the case of wireless LAN, place the printer
within a wireless coverage area.
2. Turn on the printer and the host. Then send data
from the host to the printer.
NOTE:
•
Be sure to read "Precautions for Handling of
Wireless Communication Devices" before
operating the printer.
•
Confirm that there are no obstacles between the
printer and the host. Obstacles may cause a
communication failure.
The radio connectivity is affected by the operating
environment. Especially, metal obstacles, metal
powder or locations enclosed by metal walls may
prevent proper communication.
For the installation location of access points, consult
the nearest Toshiba Tec representative.
PC
PC
10
Interface cable
RS-232C port
Handy terminal
[Bluetooth]
Access point
Handy terminal
[Wireless LAN]