Table of Contents
Advertisement
Configuring Picture Size
PIP Mode (available in PIP mode
In
PC
mode
•
Auto: Display the picture according to the aspect ratio of the each screen input source.
•
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In
AV
mode
•
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
•
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
•
Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
Screen
anything off.
― The function may not be supported depending on the ports provided with the product.
― Changing the screen size is available when the following conditions are satisfied.
‒ A digital output device is connected using the HDMI/DP cable.
‒ The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every
model can support all of these signals.).
‒ This can only be set when the external input is connected through HDMI/DP and
set to AV.
(Size
/
/
))
PC/AV Mode
PBP Mode (available in PBP
In
PC
mode
•
Auto: Display the picture according to the aspect ratio of the each screen input source.
•
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In
AV
mode
•
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
•
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
•
Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
Screen
anything off.
― The function may not be supported depending on the ports provided with the product.
― Changing the screen size is available when the following conditions are satisfied.
‒ A digital output device is connected using the HDMI/DP cable.
‒ The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every
model can support all of these signals.).
‒ This can only be set when the external input is connected through HDMI/DP and
set to AV.
is
Configuring Contrast
PIP Mode
Adjust the contrast level for sub-screen. (available in PIP
PBP Mode
Adjust the contrast level for each screen. (available in PBP
mode(Size
))
mode(Size
/
/
mode(Size
))
is
PC/AV Mode
))
29
Advertisement
Table of Contents
