Table of Contents
Advertisement
SAMSUNG MAGIC Angle
allows you to configure the settings to obtain the optimum picture quality according to
SAMSUNG
Angle
MAGIC
your viewing angle.
― This menu is not available when
SAMSUNG
Bright
MAGIC
― This menu is not available when
Game Mode
― Not available when
is set to On.
PIP/PBP Mode
You can customize the angle to suit your preferences.
4
1
2
3
•
: Select this option to view directly in front of the product.
Off
1
•
: Select this option to view from a place slightly lower than the product.
Lean Back Mode 1
2
•
: Select this option to view from a place lower than
Lean Back Mode 2
3
•
: Select this option to view from a place higher than the product.
Standing Mode
4
•
: Select this option to view from either side of the product.
Side Mode
5
•
View: Select this option for more than one viewer to view from places
Group
•
will be applied by default if
Custom:
Lean Back Mode 1
is set to
or
mode.
Cinema
Dynamic Contrast
or
is enabled.
Eye Saver Mode
1
5
5
Lean Back Mode
,
1
4
is selected.
Custom
HDMI Black Level
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/
color degradation, black level, etc.) may occur, depending on the connected source device. In such case,
can be used to adjust the image quality.
HDMI Black Level
If this is the case, correct the degraded picture quality using
― This function is only available in
― Not available when
•
Normal: Select this mode when there is no contrast ratio degradation.
•
Low: Select this mode to reduce the black level and increase the white level when there is a
contrast ratio degradation.
―
HDMI Black Level
Eye Saver Mode
― Not available when
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland "Low Blue Light Content" is a certification for products which meet requirements for
1.
lower blue light levels. When
will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same
time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and
certified as it met the requirements of TÜV Rheinland "Low Blue Light Content" standards.
, and
.
5
HDMI Black
or
mode.
HDMI 1
HDMI 2
is set to On.
PIP/PBP Mode
may not be compatible with some source devices.
is set to On.
PIP/PBP Mode
is 'On', the blue light that wavelength is around 400nm
Eye Saver Mode
Level.
24
Advertisement
Table of Contents
