Quick Start - Ebyte E78-DTU(470LN22) User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

2. Quick Start

you need to prepare: Radio antenna power adapter 485 communication line。
1.First install the antenna for the radio, then install the power supply, and make sure that the DIP switch
is in the correct state. The user can choose either the crimping methodor the power adapter to supply p
ower according to their needs;
2.Use USB to RS-485 to connect the computer to the radio;
3.Start a serial port debugging assistant, select the serial port baud rate as 9600bps, and check the mode
as 8N1.After the network access parameters are configured by THE AT instruction or the upper computer,
the device will automatically send the network access request, and the device can access the network aft
er the nearby gateway accepts the request
Access demo:
Copyright © 2012–2022 , Chengdu Ebyte Electronic Technology Co., Ltd.
E78-DTU(470LN22) User Manual
3