Advertisement
Item
Power requirements
Dimensions ( Approx.)
Power consumption
Weight (Approx.)
Operating humidity
VIDEO OUT
AUDIO OUT
System
Laser
Frequency response
Signal-to-noise ratio
Dynamic range
Note: Design and specifications are subject to change prior notice.
Troubleshooting tips
Troubleshooting tips (Common)
Before calling for service, you can check the following items on symptoms and solutions.
No sound or distorted sound:
Ensure that the equipment is connected properly.
Ensure that the input settings for the TV and stereo system are proper.
No picture:
Ensure that the equipment is connected properly.
Ensure that the LCD is on.
No play:
Condensation has formed: wait about 1to 2 hours to allow the player to dry out.
This player can't play discs other than DVDs and CDs.
The disc may be dirty and require cleaning.
Ensure that the disc is installed with the label side up.
No remote control:
Check the batteries are installed with the correct polarities(+&-).
The batteries are depleted: replace them with new ones.
Point the remote control unit at remote them sensor and operate.
Remove the obstacles between the remote control unit and operate.
Operate the remote control unit at a distance of not more than 8 meters from the remote
control sensor.
No key operation (by the unit and/or the remote control) is effective:
Turn the unit off and then back to on. Alternatively, turn off the unit, disconnect the AC
:AC100-240V, 50/60 Hz
:260(L)×195(W) ×38(H)MM
:<10w
:1.1 kg
:5% to 90%
:1Vp-p (75 Ω)
:1.4Vrms (1KHz ,0dB)
: Semiconductor laser, wavelength 650 nm
:20Hz to 20 kHz (1dB)
: More than 80 dB (ANALOG OUT connectors only)
: More than 85 dB (DVD/CD)
Standard requirement
34
Advertisement
