3M MPro110 How To Connect

Micro professional projector

Hide thumbs Also See for MPro110:

How to Connect Your Device to

The 3M™ Micro Professional Projector MPro110

The 3M MPro110 can connect seamlessly to your PC or Mac® laptop or ultra mobile system, as well as PDAs, video

phones, digital and video cameras, gaming consoles and digital media players from any manufacturer.

What you will need:

• Your device

• The appropriate video cable for your specific device

• Your 3M Micro Professional Projector MPro110

• The RCA or VGA video cable that came with your 3M MPro110

Step-by-s tep in struc tions:

Step 1. Attach the manufacturer's video cable (RCA or VGA) to your specific video device.

Step 2. Attach the 3M MPro110's video cable (RCA or VGA) to the MPro110.

RCA Video Cable

VGA Cable

Step 3a. (For RCA Connectivity) Connect the two RCA video cables together using the included RCA adapter.

Note: Similar to the supplied cable, most RCA video cables have yellow ends.

RCA Adapter

Table of Contents

Do you have a question about the MPro110 and is the answer not in the manual?

Page 1 The 3M™ Micro Professional Projector MPro110 The 3M MPro110 can connect seamlessly to your PC or Mac® laptop or ultra mobile system, as well as PDAs, video phones, digital and video cameras, gaming consoles and digital media players from any manufacturer.
Page 2 Note: Some devices may require additional adapters to convert their video signals to the VGA format. Step 4. That’s it! Turn on the 3M MPro 110 and your device, and you’re ready to start sharing your pictures, presentations or video on any surface, almost anywhere.