Table of Contents
Advertisement
6.4 Installation in Steel or
Aluminum Vessels
Installation of a generator set in a vessel constructed of
a material capable of conducting current (e.g., steel or
aluminum) is subject to considerations not normally
encountered in fiberglass or wood vessels.
differences include equipment grounding, grounding of
neutral
conductors, ground-fault
isolation of galvanic currents.
The scope of these topics is too extensive to be fully
discussed here. Consult your local marine authority for
more information.
Before installing the generator set, check the available
wiring diagrams in the operation manual to become
familiar with the electrical system.
TP-5982
4/06
6.5 Installation Regulations
The U.S. Coast Guard governs generator set
installation in U.S. pleasurecraft and commercial
vessels. Refer to the applicable regulations below:
These
U.S. Pleasurecraft Installation
Regulations
protection, and
Title 33CFR, Chapter I, U.S. Coast Guard, Part 183
U.S. Commercial Vessel Installation
Regulations
Title 46CFR, Chapter I, U.S. Coast Guard
1. Subpart I—Electrical Equipment
2. Subpart J—Fuel Systems
1. Part 111—Electrical Systems
2. Part 182—Machinery Installation
m:sc:001:001
Section 6 Electrical System
33
Hide quick links:
Advertisement
Table of Contents
