Wiring
Mount 4.7K ELR on the last unit when abort switch and manual release switch are connected to control panel circuits. Mount 47K resis-
tor on last unit when abort switch and manual release switch are connected to monitor module or control module. Refer to control panel
manual for the listed ELR. Refer to the product installation documentation for connection to the control panel
BG-12LRA (Rear view) Agent Release Pull Station
For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105.
Page 2 of 2 — DF-52353:a • 08/4/10
Mount End-of-Line Resistor on the last unit.
This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
www.firelite.com
Fire•Lite® Alarms is a registered trademark of Honeywell International Inc.
Bayblend® is a registered trademark of Bayer Corp.
©2010 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
Made in the U.S. A.