Removal And Replacement Procedures - Compaq Tablet PC TC1000 Maintenance And Service Manual

5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
Torx T8 and Phillips P0 screws are removed during the
disassembly of the tablet PC and the docking station. There are
36 screws, in 4 different sizes, that must be removed, replaced,
and loosened when servicing the tablet PC. There are 17 screws,
in 4 different sizes, that must be removed and replaced when
servicing the docking station. Make special note of each screw
size and location during removal and replacement.
Refer to Appendix C, "Screw Listing," for detailed information
on screw sizes, locations, and usage.
Maintenance and Service Guide 5–1