Table of Contents
Advertisement
1. SAFETY CAUTION
On the process of welding, there will be any possibility of injury, so please take protection into
consideration during operation. More detail please review the Operator Safety Guide, which com-
plies with the preventive requirements of the manufacturer.
Electric shock——may lead to death!!
• Set the earth fitting according to applying standard.
• It is forbidden to touch the electric parts and electrode when the skin is naked,
wearing wet gloves or clothes.
• Make sure you are insulated from the ground and the workshop.
• Make sure you are in safe position.
Gas —— may be harmful health!
• Keep your head out of the gas.
• When arc welding, air extractor should be used to prevent from breathing gas.
• Use enough forced ventilation or local exhaust (forced suction) at
• the arc to remove the fumes from your breathing area.
Arc radiation —— Harmful to your eye and burn your skin！
• Use suitable helmet and light filter, wear protective garment to protect eye and body.
• Use suitable helmet or curtain to protect looker-on.
Fire
• Do not weld near flammable material or where the atmosphere may contain
flammable dust, gas, or liquid vapors.
Noise —— extreme noise harmful to ear！
• Use ear protector or others means to protect ear.
• Warn that noise harmful to hearing if looker – on around.
• Wear approved safety glasses with side shields under your
• Welding helmet or face shield and at all times in the work area.
• Wear complete body protection. Wear oil-free protective clothing
such as leather gloves, heavy shirt, cuffless pants, and high boots.
• Do not weld on containers that have held combustibles, or on closed containers
such as tanks, drums, or pipes. (Lifting devices) Small and light welder can be hold by
hand, and heavier one can be moved by it's wheels. The package of welder is carton
box and wooden case. There are no lifting devices on the welder and user need to use
the forklift to take it to the right place and then unpacked.
• Make sure that all the accessories are been dismantled.
• Forbid to stand below the machine when transport.
• It is strictly prohibited to crane fast moving.
• Don't put the machine placed 35 degree in slope.
MMA
2
Advertisement
Table of Contents
