Advertisement
7. Turn off the power distribution box.
7. SAFETY INSTRUCTIONS
Read this manual carefully before using the welder, in order to avoid accidents. The incorrect opera-
tion of the tool can cause injuries in three different degrees. The signs are indicated in this manual.
Warning: malfunction will lead to serious injury or death.
Be careful: incorrect operation could result in serious injury or potential accidents.
Attention: misuse may cause medium grade injuries or destruction of the machine.
Severe injuries refer to those that need long term treatment in a hospital caused by visible damage,
wounds (high temperature or low temperature), electric shock injury, broken bones, intoxication, and
so on; and minor injuries means an electric shock or burns without long-term cure
The destruction of the machine indicates the loss of the adeccuate shape or its total breakage.
DANGER!: In order to prevent serious bodily injury from accidents, you should carefully observe the
following:
1. The construction of the power supply, the selection of the site to place the machine, the maintenan-
ce of the work piece after welding, and waste management, must be done according to internal rules
and standards of your company.
2. Prohibit the entrance to the welding-site of irrelevant or unauthorized people.
3. People with pacemakers can not approach to the welder in use or surround the welding site without
a doctor's permission.
4. Let a professional or expert to install, maintain or repair the welder.
5. Leave the operation of the machine to personnel with technical skills and safety knowledge.
6. Use the machine only to weld.
DANGER!: In order to avoid to suffer an electric shock, please, follow the next rules. Once you touch
electrical parts, it may cause a lethal electric shock or burns, so:
1. Do not touch electric parts
2. Let a qualified electrician to do the machine's land connections according to the regulations.
3. For installation and repair, switch off the power distribution box, and operate in five minutes.
4. Do not use the cable with insulating protective cover damaged and exposed conductor.
5. Ensure the cable insulation.
6. Please, dont use the machine without the proper safety helmet.
7.Please, use dry insulating gloves.
8. Please use a safety net when working in high places.
9. Regularly maintain and repair it, and use it after it's repaired.
10. Please turn off all input switches.
11. Please use a shockproof device when the machine is used in narrow or high places.
WARNING: In order to prevent accidents such as fires, explosions, etc., please obey the following
rules:
1. Do not put flammable things in the place where you will weld.
2. Do not weld near inflammable gas.
3. Do not leave the hot machine near flammable material.
4. The parts of cable splicing must be fully insulated.
5. When welding the floor and the wall, please remove the flammable material in the back.
6. The cable joint with the tool contact side of the machine must be aproched to what you are welding.
7. Do not weld gas pipes, sealed containers and others alike.
8. Please place fire extinguisher near the welding site.
WARNING: The entrance into the interior of the machine, of iron splash and dust caused by welding
and polishing, will lead to the deterioration of the insulation.
In order to prevent fire caused by deterioration of electrical insulation, please obey the next rules:
7
Advertisement
