Removing An Optical Disc (Without Power) - Compaq Presario V2605TN Hardware And Software Manual

Removing an Optical Disc (Without Power)

If external or battery power is unavailable:
1. Insert the end of a paper clip 1 into the release access in the
front bezel of the drive.
2. Press in gently until the tray is released, and then pull out the
tray 2.
3. Remove the disc 3 from the tray by gently pressing down on
the spindle while lifting the outer edges of the disc. Hold the
disc by the edges and avoid touching the flat surfaces.
✎
4. Close the media tray and place the disc in a protective case.
Hardware and Software Guide
If the media tray is not fully accessible, tilt the disc carefully
as you remove it.
Multimedia
4–11