WAREMA KNX 2024236 Short Description

WAREMA KNX
room controller
Short description
General information
Fig. 1 WAREMA KNX room controller
The WAREMA KNX Room Controller for the KNX bus
system measures room temperature. It has a Touch
Display on which different display and operation sides are
displayed depending on the individual configuration. The
device is supplemented with a frame from the switch se-
ries used in the building so that it blends seamlessly into
the interior fittings.
Functions:
 Colour Touch Display with display and operation sides
for
# 1x current temperature display
# 1x bus data display (4 universal display places)
# 1x temperature regulation (including mode switching)
# 3x drive operations (shading, window) with button
and/or slide controls
# 3x light switches or dimmers (with percentage dis-
play)
# 1x RGB light control
# 1x light-colour temperature settings
# 1x HCL controls (light-colour temperature adjustment
over various adjustable periods of time)
# 1x scene (4 scenes with retrieval and saving)
# Week time switch
# 2x information pages for every two 14 byte text
objects
# Device settings
 4 inputs for binary contacts or temperature sensor
 Adjustable limit value
 8 AND and 8 OR logic gates
 8 multifunction modules (calculator)
 4 adjusting variable comparators
 Measuring the temperature, mixed value calculation.
 PI controller for heating and cooling with
fan coil controls
 Summer compensation for cooling
warema_2030680_alhb_en_v2•2022-04-01
The device is configured via the KNX software ETS. The
product database required for this (.knxprod) can be
found in the online catalogue of the ETS or on the internet
at http://www.warema.de/knx.
Scope of delivery
 Housing with display
 Support plate
 Connecting line for analogue/digital inputs
Additionally required (not included in the scope of deliv-
ery):
 Switch box ∅ 60 mm, 42 mm deep
 Frame (for use 55 x 55 mm), suitable for the switch
program used in the building
Technical data (shortened)
Installation Flush-mounted (wall mounting in
switch box
∅ 60 mm, 42 mm deep)
Degree of protection IP 20
Dimensions approx. 55 x 55 x 35 mm
(W x H x D), structure depth
approx. 7 mm
Total weight approx. 90 g (incl. connecting
line, support plate)
Ambient temperature Operation -20...+70°C,
Bearing -30...+70°C
Surrounding air humidity max. 95% RH, avoid condensation
Operating voltage KNX bus voltage
Bus current max. 18 mA
Data output KNX +/- bus plug terminal
Inputs 4x analogue/digital,
max. line length 10 m
Temperature measuring -20...+70°C
range
Article number 2024236
Optional accessories
Cover frame
GIRA E2 pure white,
glossy
The product conforms with the regulations of the EU
directives.
Cleaning
Clean the housing with a soft, dry cloth. Do not use deter-
gents, cleaning agents, solvents, abrasive substances or
steam cleaners!
We reserve the right to make technical modifications
Valid as of
1 April 2022
Keep for future use.
2004335
1