Selecting A Font With Dip Switches - Epson LQ-500 User Manual

SelecType skips over the
font module is not installed.
The font selected by SelecType remains valid until another font is
selected by a software command or until the printer is turned off,
reset, or initialized.

Selecting a font with DIP switches

You can set your favorite font as the default font by setting DIP
switches and
1-4
The printer comes with Roman as the default font. If you wish to
change it, set the DIP switches as shown in the table below.
CAUTION:
changing any DIP switch settings.
Font
Roman
Sans Serif
Slot
Draft
In addition to font selection, you can also change
pitch and add other print enhancements by using software
commands listed in the Command Summary, Chapter
SLOT
1-5.
Be sure
the
SW1-4 SW1-5
OFF OFF
ON OFF
OFF ON
ON ON
option (both lights on) if an optional
printer is turned off before
Using
Selecting Typestyles
character
the
6.
the Printer
3-13