Epson FX-80 User Manual page 105

Forms Control Commands
CHR$(12)
["L]
CHR$(13)
CHR$(27)"8"
CHR$(27)"9"
CHR$(27)"C"CHR$(n) Sets the form length in lines: n = 0 - 127.
CHR$(27)"C"CHR$(0)CHR$(n)
CHR$(27)"N"CHR$(n) Produces a variable skip-over-perforation. n = 0 - form
CHR$(27)"0"
Formatting Commands
CHR$(27)"D"CHR$(n
CHR$(9) or CHR$(137) Activates a horizontal tab.
CHR$(27)"B"CHR$(n
CHR$(27)"b"CHR$(n)CHR$(n
CHR$(27)"/"CHR$(n) Selects channel n.
CHR$(1l)
CHR$(27)"Q"CHR$(n) Sets the right margin at n, where n ranges
CHR$(27)"l"CHR$(n)
CHR$(27)"U1"
CHR$(27)"U0"
CHR$(27)"<"
Graphics Modes
CHR$(2^X)
CHR$(27)"K"CHR$(n
CHR$(27)"L"CHR$(n
CHR$(27)"Y"CHR$(n
CHR$(27)"Z"CHR$(n
CHR$(27)"*"CHR$(n)CHR$(n
CHR$(27)"^"CHR$(0)CHR$(n
CHR$(27)"^"CHR$(l)CHR$(n
Produces a form feed.
Produces a carriage return.
Turns the paper-out
Turns the paper-out sensor ON.
Sets the form length in inches: n = 0 - 22.
length or 127.
Turns skip-over-perforation OFF.
) ... CHR$(n )CHR$(0)
1 k
Sets the horizontal tab stops at n
k < = 32, 0 < n < margin length.
k
)....CHR$(n )CHB$(0)
1 k
Sets the vertical tab stops at n
form
length.
)CHB$(n ) ... CHR$(n
1 2
Stores vertical tab stops in channel n, where n = 0 - 7. Chan-
nel 0 is the same as CHR$(27)"B".*
Activates a vertical tab.
from 2 - 80 in Pica,
3 - 96 in Elite, and
4 - 137 in Compressed.
Sets the left margin at n, where n ranges
from 0 - 78 in Pica,
0 - 93 in Elite, and
0 - 133 in Compressed.*
Turns Continuous Unidirectional Mode ON.
Turns Continuous Unidirectional Mode OFF.
Turns One-Line Unidirectional Mode ON.
Fires pin X when sent as graphics data, where
X = 0 -7.
)CHR$(n );
1 2
Turns Single-Density Graphics Mode ON;
width = n + 256*n
1
)CHR$(n );
1 2
Turns Double-Density Graphics Mode ON.
)CHR$(n );
1 2
Turns High-Speed Double-Density Graphics ON.
)CHR$(n );
1 2
Turns Quadruple-Density Graphics Mode ON.
)CHR$(n );
1 2
Selects Graphics Density n, where:
0 = 480 dots per line
1 = 960 dpl (same as CHR$(27)"L") 5 = 576 dpl (1-to-1 ratio)
2 = 960 dpl (same as CHR$(27)"Y") 6 = 720 dpl
3 = 1920 dpl (same as CHR$(27)"Z")
)CHR$(n );
1 2
Turns Single-Density Nine-Pin Graphics Mode ON.
)CHR$(n
1 2
Turns Double-Density Nine-Pin Graphics Mode ON
OFF.
sensor
, n , ..., n
1 2
- n , where k < = 16; n
1 k
)CHR$(0)
k
2
4 = 640 dpl
);
, where
k
= 1 to
k