End-Of-Life Vehicle Recovery - Opel MOKKA Owner's Manual

Putting back into operation
When the vehicle is to be put back into
operation:
● Connect the clamp to the
negative terminal of the vehicle
battery. Initialise the power
windows 3 23.
● Check tyre pressure.
● Fill up the washer fluid reservoir.
● Check the engine oil level.
● Check the coolant level.
● Fit the number plate if necessary.
Putting back into operation (BEV)
When the vehicle is to be put back into
operation:
● Connect the clamp to the
negative terminal of the vehicle
battery. Initialise the power
windows 3 23.
● Check tyre pressure.
● Fill up the washer fluid reservoir.
● Check the coolant level.
● Fit the number plate if necessary.
Propulsion types 3 4.

End-of-life vehicle recovery

Information on end-of-life vehicle
recovery centres and the recycling of
end-of-life vehicles is available on our
website, where legally required. Only
entrust this work to an authorised
recycling centre.
High voltage battery
The high voltage battery is designed
for the life of the vehicle if the
recommendations are followed. If it
becomes necessary to replace the
high voltage battery, contact a
workshop for instructions on its
disposal. Improper disposal carries
Vehicle care
the risk of severe burns, electric
shock, and damage to the
environment.
Recommendations 3 259.
251