Nakayama PRO GS8600 Manual page 4

EN
A. Keep children and pets at least 50 feet from the working area and ensure they are under the watchful care of a responsible
adult.
B. Be alert and turn the machine off if children or pets enter the work area.
C. Never allow children to operate the Wood Chipper.
Safety with Gasoline - Powered Machines
Warning!
Gasoline is a highly flammable liquid. Gasoline also gives off flammable vapour that can be easily ignited and cause a fire or
explosion. Never overlook the hazards of gasoline. Always follow these precautions:
A. Never run the engine in an enclosed area or without proper ventilation as the exhaust from the engine contains carbon
monoxide, which is an odourless, tasteless, and a deadly poisonous gas.
B. Store all fuel and oil in containers specifically designed and approved for this purpose and keep away from heat and open
flame, and out of the reach of children.
C. Replace rubber fuel lines and grommets when worn or damaged and after 5 years of use.
D. Fill the gasoline tank outdoors with the engine off and allow the engine to cool completely. Don't handle gasoline if you or
anyone nearby is smoking, or if you're near anything that could cause it to ignite or explode. Reinstall the fuel tank cap and
fuel container cap securely.
E. If you spill gasoline, do not attempt to start the engine. Move the machine away from the area of the spill and avoid creat-
ing any source of ignition until the gas vapours have dissipated. Wipe up any spilled fuel to prevent a fire hazard and properly
dispose of the waste.
F. Allow the engine to cool completely before storing in any enclosure. Never store a machine that has gas in the tank, or a
fuel container, near an open flame or spark such as a water heater, space heater, clothes dryer or furnace.
G. Never make adjustments or repairs with the engine running. Shut down the engine, disconnect the spark plug wire, keep-
ing it away from the spark plug to prevent accidental starting, wait 5 minutes before making adjustments or repairs.
H. Never tamper with the engine's governor setting. The governor controls the maximum safe operation speed and protects
the engine. Over-speeding the engine is dangerous and will cause damage to the engine and to the other moving parts of the
machine. If required, see your authorized dealer for engine governor adjustments.
I. Keep combustible substances away from the engine when it is hot.
J. Never cover the machine while the muffler is still hot.
K. Do not operate the engine with the air cleaner or the carburettor air intake cover removed. Removal of such parts could
create a fire hazard. Do not use flammable solutions to clean the air filter.
L. The muffler and engine become very hot and can cause a severe burn; do not touch.
General Safety
Warning!
Operating this Wood Chipper safely is necessary to prevent or minimize the risk of death or serious injury. Unsafe operation
can create a number of hazards for you. Always take the following precautions when operating:
A. The Wood Chipper is a powerful tool, not a plaything. Exercise extreme caution at all times. The machine is designed to
chip wood. Do not use it for any other purpose.
B. Know how to stop the Wood Chipper quickly.
C. Never operate your unit on a slippery, wet, muddy, or icy surface. Exercise caution to avoid slipping or falling.
D. See manufacturer's instructions for proper operation and installation of accessories.
E. Never use the machine without ensuring that all guards and shields are in place.
F. Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts on the Wood Chipper. This
includes all shields and guards. Modifications to your machine could cause personal injuries and property damage and will
invalid your warranty.
G. If the machine start to make an unusual noise or vibrate, shut down the engine, disconnect the spark plug wire, keeping
it away from the spark plug to prevent accidental starting, wait 5 minutes for engine to cool down, then inspect for damage.
Vibration is generally a warning of trouble. Check damaged parts and clean, repair and/or replace as necessary.
H. Never tamper with safety devices. Check their proper operation regularly.
I. Before performing any maintenance or inspection procedure, shut down the engine, disconnect the spark plug wire keeping
it away from the spark plug to prevent accidental starting, wait 5 minutes for machine to cool down.
J. Never allow people who are unfamiliar with these instructions to use the Wood Chipper. Allow only responsible individuals
who are familiar with these rules of safe operation to use your machine.
K. Never overload or attempt to chip woods beyond the manufacturer's recommendation. It could result in personal injury or
damage to the machine.
L. While using, don't hurry or take things for granted. When in doubt about the equipment or your surroundings stop the
machine and take time to look things over.
4
WWW.NikolaouTOOLS.gr