Safety Instructions - Nakayama PRO GS8600 Manual

EN

Safety Instructions

Warnings! (Page 1)
1A: Emergency Switch
1B: Emergency Stop-wire
Should make sure the emergency stop switch is available before every use. Or may result in serious injury even death.
Caution!
This machine is designed solely to chip wood and must not be used for any other purpose.
It should only be used by trained operators who are familiar with the content of this manual. It is potentially hazardous to fit
or use any parts other than your dealer parts. The company disclaims all liability for the consequences of such use, which in
addition voids the machine warranty.
Before using the wood chipper
Notice!
A. Operators must be fully trained before using this machine.
B. User Manual is read and understood.
C. Machine is positioned on level ground, all guards are fitted and in good condition.
D. Blades are in good condition and secure. All blades are sharpened or replaced in sets.
E. All fasteners are checked for tightness.
F. Only WOODEN materials free of nails etc. are fed into the machine.
G. Emergency stop wire is rightly connected and the switch is functional.
H. Fire extinguisher is available on site.
When using the wood chipper
Notice!
A. Always feed from the side.
B. It is better to have a second trained operator within easy reach of the machine.
C. Maintain strict discipline at all times and service machine at specified periods.
D. Note direction of discharge chute and if necessary note the wind direction to prevent debris from being blown into
highway or where it could affect members of the public.
E. DO NOT put any part of your body into the in-feed chute while the machine is running.
F. DO NOT operate the machine whilst under the influence of alcohol or drugs.
G. DO NOT operate inside a building or confined space or Climb on the in-feed chute.
Protecting yourself and those around you
Warning!
This is a high-powered machine, with moving parts operating with high energy. You must operate the machine safely.
Unsafe operation can create a number of hazards for you, as well as anyone else in the nearby area.
Always take the following precautions when using this machine:
A. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people, their property,
and themselves.
B. Always wear protective goggles or safety glasses with side shields while using the Wood Chipper to protect your eyes from
possible thrown debris.
C. Avoid wearing loose clothing or jewelry, which can catch on moving parts.
D. We recommend wearing gloves while using the Wood Chipper. Be sure your gloves fit properly and do not have loose cuffs
or drawstrings.
E. Wear shoes with non-slip treads when using your Wood Chipper. If you have safety shoes, we recommend wearing them.
Do not use the machine while barefoot or wearing open sandals.
F. Wear long pants while operating the Wood Chipper.
G. Keep bystanders at least 50 feet away from your work area at all times. Stop the engine when another person or pet
approaches.
Safety for Children and Pets
Warning!
Tragic accidents can occur if the operator is not alert to the presence of children and pets. Children are often attracted to
the machine and the chipping activity. Never assume that children will remain where you last saw them. Always follow these
precautions:
3
WWW.NikolaouTOOLS.gr