MDR-Z1R SECTION 1 SERVICING NOTES The SERVICING NOTES contains important information for servicing. Be sure to read this section before repairing the unit. NOTE OF REPLACING THE HEAD BAND ASSY NOTE OF REPLACING THE HARD CASE ASSY A serial number is marked on the slider of head band assy.
MDR-Z1R SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. 2-1. DISASSEMBLY FLOW Note: L-ch and R-ch can be similarly disassembled. The illustration of R-ch is used for explanation. 2-2. EAR PAD ASSY (Page 4) 2-3.
Page 4
MDR-Z1R Note: Follow the disassembly procedure in the numerical order given. 2-2. EAR PAD ASSY Note: L-ch and R-ch can be similarly disassembled. The illustration of 1 Rotate the ear pad assy counter-clockwise R-ch is used for explanation. to remove the claw.
Page 5
MDR-Z1R 2-3. TWIST HOLDER, HOUSING BLOCK Note: L-ch and R-ch can be similarly disassembled. The illustration of R-ch is used for explanation. 2 ornamental tapping screw (M1.7 2 ornamental tapping screw (M1.7 1 Extend the slider in the direction 3 shaft stopper of the arrow.
Page 6
MDR-Z1R 2-5. HOUSING ASSY, HANGER ASSY Note 1: L-ch and R-ch can be similarly disassembled. The illustration of R-ch is used for explanation. Note 4: Identify the holder hanger (L) and holder hanger (R) by looking at the engraving on the parts.
MDR-Z1R SECTION 3 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so • The mechanical parts with no reference they may have some difference from the number in the exploded views are not sup- original one. plied. • Items marked “*” are not stocked since •...
Page 8
MDR-Z1R 3-2. L-ch, HEAD BAND SECTION Note: A serial number is marked on the slider – L-ch – of head band assy. (refer to page 2) Therefore, when the head band assy (Ref. No. 61) is replaced, the serial number changes.