Head Alignment; Network Setup; Options Setup - Epson Stylus Pro 7890 Quick Reference Manual

Control Panel Menus (continued)
PAPER SETUP

HEAD ALIGNMENT

NETWORK SETUP

OPTIONS SETUP

ROLL PAPER REMAINING
REMAINING PPR SETUP
ROLL PAPER LENGTH
ROLL LENGTH ALERT
PAPER TYPE
CUSTOM PAPER
PAPER TYPE
PLATEN GAP
THICKNESS PATTERN
PAPER FEED ADJUST
DRYING TIME
PAPER SUCTION
SET ROLL PAPER TENSION
REMOVE SKEW
PAPER THICKNESS
SELECT PAPER TYPE
SELECT THICKNESS
ALIGNMENT
AUTO
NETWORK SETUP
IP ADDRESS SETTING
IP , SM, DG SETTING
BONJOUR
INIT NETWORK SETTING
Spectro Proofer
TAKE-UP REEL
Setting appears only when no paper is loaded
OFF, ON
From 15 to 300 ft
From 4 to 50 ft
Media type loaded in the printer
Paper No 1 to 10
Photo, Proofing, Fine Art, Matte, Plain, Others
STANDARD, NARROW, WIDE, WIDER
PRINT
-0.70% to 0.70%
0.0 sec. to 10.0 sec.
STANDARD, -1, -2, -3, -4
STANDARD, HIGH, HIGHER
ON, OFF
Media type loaded in the printer
8 mil (0.2 mm), 4 mil to 60 mil (0.1 to 1.5 mm)
UNI-D, BI-D 2-COLOR, BI-D ALL, BI-D #1, BI-D #2, BI-D #3, BI-D #4
DISABLE, ENABLE
AUTO, PANEL
IP address, subnet mask, default gateway
ON, OFF
Resets all network settings
Displays status of various parts and performs device alignment
Displays version of the take-up reel installed (Pro 9890 only)
10