Swapping The Black Ink Cartridges - Epson Stylus Photo R2400 User Manual

Swapping the Black Ink Cartridges

Be sure you have the other black cartridge handy before you begin. Once you start
replacing a cartridge, you must complete all the steps in one session.
You can replace a cartridge whether the red
1. Make sure the printer is turned on (the green P power light should be on, but not
flashing). Then open the printer cover.
2. Press the
The print head moves and the green P power light flashes.
3. Lift up the cartridge cover.
4. Press in the tab on the back of the black cartridge, and lift it out of the printer as
shown below. Store this cartridge in a sealable plastic bag for later use.
5. Shake the new cartridge four or five times before
opening its package. (Don't shake it after it's
unwrapped.)
6. Remove the new cartridge from its package.
Caution: Don't touch the green circuit board on
the front of the cartridge; you may inhibit normal
operation and printing.
7. Slide the new cartridge into its slot. The side with the green circuit board goes in
the front of the slot.
70
Printing Special Photos
H ink button.
H
ink light is off, flashing, or on.