Epson Stylus Photo R2400 User Manual page 24

10. Push the paper into the feeder until it meets resistance. Maintain pressure on the
paper until the printer feeds the paper automatically.
Note: You may need to reload canvas or thicker roll media to ensure accurate
paper registration.
When loading canvas, leave ample slack between the roll and the printer to
ensure smooth paper feeding. Be sure to maintain slack while printing. If you
don't, your prints may show distortion of shapes, fuzzy text, or banding.
When cutting canvas or other roll paper, it is important to have a straight edge.
An uneven or frayed edge may result in misfeeds, misregistration, or
unacceptable print quality.
11. Open the printer cover and look down into the printer to make sure the paper is
loaded correctly. It should be straight and the leading edge of the paper should
not be visible.
If the paper isn't loaded correctly, press the z roll paper button for 3 seconds to
back the paper all the way out.
Then turn the roll paper holder knobs to roll up the paper. Press the
button to clear the paper out error. Repeat steps 7 through 9 to reload the paper.
Follow the instructions on page 43 to print on roll paper.
24
Loading Paper
Paper is loaded correctly
If edge is visible, reload paper
)
paper