How To Use Panel Functions - RASLOK HCA-T3 Operating Instructions Manual

How to use panel functions

Hot Water
Cold Water
Ambient Water
Turn on the heating switch, the red LED indicator will be on
and the heating system starts working. When the hot water
comes up to 85-95° or so, the red light goes off, the heating
system stops working. The machine turns to the warm-
keeping status. When the hot water temperature is lower
than 85° , the heating system will resume working
automatically.
1. Press "Hot Water Lock" button to unlock position.
2. Press "Hot Water Tap" to dispense the hot water.
Turn on the cooling switch, the green LED indicator will be
on and the cooling system starts working. When the cold
water falls to below 5 ° C, the green light goes off, the
cooling system stops working. The machine turns to the
cold-keeping status. When the cold-water temperature goes
up to 10 ° C, the cooling system will resume working
automatically.
Press the "Cold Water Tap" to dispense the cold water.
Press the "Ambient Water Tap" to dispense the ambient
water.
Page 6 of 10