Safety Information - RASLOK HCA-T3 Operating Instructions Manual

Safety information

Read, understand, and follow all safety information contained in these instructions prior to
use of the RASLOK Filtered Water Dispenser HCA-T2.
Retain these instructions for future reference.
Intended Use:
The RASLOK TM Filtered Water Dispenser HCA-T2 is intended for use in filtering potable water for drinking
purposes. The system is typically installed at point of use and must be installed by a RASLOK authorized
professional installer according to installation instructions.
Explanation of Signal Word Consequences:
WARNING
NOTICE
WARNINGS
About the Power Supply
DO NOT switch ON power supply until water is flowing out from HOT water outlet (red color tap).
Otherwise, heating system will be damaged.
To reduce the risks associated with hazardous voltage and fire:
Do not plug-in multiple devices into the same power outlet or extension cord simultaneously.
●
Plug the power cord into a 220 V outlet with at least a rating of 10 A and power surge protection.
●
Please ensure the power plug and power outlet is clean and dry.
●
Damaged parts or machine malfunction are only to be repaired or replaced by RASLOK
●
authorized professionals.
To reduce the risks associated with hazardous voltage:
Do not operate the machine with wet hands.
●
Do not bend the power cord excessively or put heavy objects over the power cord. Ensure your pets do
●
not damage the power cord.
Do not use the equipment if there is any damage to power cord, plug or the outlet.
●
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury and/or property damage.
Indicates a situation which, if not avoided, could result in property
damage.
Page 3 of 10