Table of Contents Safety information ..................3 NOTICE ....................4 Panel functions and control ................5 How to use panel functions ................6 Cleaning and maintenance of water dispenser ............. 7 Troubleshooting guide .................. 8 Technical specifications .................. 9 Page 2 of 10...
The RASLOK Filtered Water Dispenser HCA-T2 is intended for use in filtering potable water for drinking purposes. The system is typically installed at point of use and must be installed by a RASLOK authorized professional installer according to installation instructions.
Safety information Important guide during installation / Use To reduce the risks associated with fire and explosion: Do not place the equipment in area with potential gas leak, or near heating devices. ● Do not put candles, lit cigarettes, or any heating devices on the unit. ●...
Panel functions and control Heating LED Indicator Power LED Indicator Cooling LED Indicator Hot Water Lock Cold Water Tap Hot Water Tap Ambient Water Tap Water Tray Page 5 of 10...
How to use panel functions Turn on the heating switch, the red LED indicator will be on Hot Water and the heating system starts working. When the hot water comes up to 85-95° or so, the red light goes off, the heating system stops working.
Cleaning and maintenance of water dispenser Section Details The unit can be installed at places with low water pressure that Location are within water quality range. Installation Do not install the unit in the following places: Environment •Anywhere that will expose the unit to direct sunlight •Anywhere with fluctuating temperatures devices The spout should be cleaned regularly.
Troubleshooting guide Issues Checking points Actions Display is not The power plug could be not properly Ensure that the power plug is now inserted properly switched on or not inserted into its socket. into its socket. operational Ensure that the unit is properly connected to a proper Ambient and cold The water supply might be disconnected.
Technical specifications RASLOK MODEL NO. HCA-T3 Voltage 220-240V ~ Rated Frequency 50-60Hz Heating Power 500W Hot Water Temperature 85-95℃ Hot Water Tank Cold Water Tank Cooling Power Cooling Current 0.8A Cold Water Temperature ≤10℃ Refrigerant Code R134a Refrigerant Capacity Dimension W x D x H (cm)
Page 10
Limitation of Liability: RASLOK Pte Ltd will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Some countries do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.