You See A Spooling Error Message (Windows); You See A Memory Error Message (Macintosh); In Windows 95, The Status Monitor Box Does Not Appear With The Despooler; A Portion Of Your Image Doesn't Print (Macintosh) - Epson Stylus COLOR 800N User Manual

You see a spooling error message (Windows).

Possible cause
If you see error messages
or printing is very slow, the
problem may be caused by
temporary files.
Your hard drive is too full.
Your computer doesn't
have enough memory for
the file you're printing.

You see a memory error message (Macintosh).

Possible cause
You need to increase the
memory allocation for your
application,
EPSON
Monitor2, or both.
In Windows 95, the Status Monitor box does not appear with the
Despooler.
Possible cause
The Windows Print
Manager is interfering with
the Status Monitor.

A portion of your image doesn't print (Macintosh).

Possible cause
Your system doesn't have
enough available memory.
You need to increase the
memory allocation for your
application, EPSON
Monitor2, or both.
Solution
Change the Spool Manager default directory, following the
instructions in Chapter 4.
Delete unnecessary files to make room on the drive.
Try one of the following:
• Reduce the resolution of your image.
• Select fewer colors or a lower resolution for your display or
monitor.
• Add more memory to your computer.
Solution
Get Info
Choose from the File menu when
highlighted and increase the Memory Requirements. See Chapter 4
for more information. Also, turn off background printing if it's on.
Solution
Use Print Manager for this port
Make sure
the Spool Manager Queue setup. Then check your bidirectional
spool settings. See Chapter 4 for instructions.
Solution
Close any other applications you are running and turn off
background printing.
Get Info
Choose from the File menu when the application is
active and increase the Memory Requirements. See Chapter 4 for
more information.
6-11
Troubleshooting
Monitor2 is
EPSON
is not checked in