Tool Assembly - Daewoo DACM Series User Manual

8. TOOL ASSEMBLY.

MONTAGE
CAUTION!
It is highly recommended to work with an assistant in the assembly of the concrete mixer!
Shelf
• Pull the wheel axle located on each side of the wheel.
• Set with the keys caps
• To the beams you must connect an additional support. Insert it inside the spring pedal.
• Secure the connection screws (M8h70 and M6h25). Tighten the screws.
•Connect the frame with the wheel frame. Fix its position with the screws (M8h70). Tighten the screws.
Lower drum
• Set the drum's rotational arc of reference under the beam. Secure the position with screws (M8hb5)
• Carefully place the lower balance of Raban in the frame, so that the bearings are aligned.
•Align each side
6