Subscribe to Our Youtube Channel
Related Manuals for Daewoo DAEM160L
Summary of Contents for Daewoo DAEM160L
- Page 1 DAEM160L Electric mixer USER'S MANUAL www.daewoopowerproducts.com Manufactured under license of Daewoo International Corporation, Korea...
-
Page 2: Table Of Contents
INDEX 1. GENERAL SAFETY RULES ........................3 2. FUNCTIONAL DESCRIPTION ......................... 5 3. OPERATION ............................. 7 4. MAITENANCE ............................8 5. TECHNICAL INFORMATION ........................9 6. EXPLODED VIEW ............................. 9 WARRANTY ............................... 10... -
Page 3: General Safety Rules
The tool is used for mixing wall materials and other materials (Except combustible) Power supply This tool can only be connected to the same voltage as the voltage shown on the nameplate 1. GENERAL SAFETY RULES WARNING: Read and understand all instructions.Failure to follow all instructions listed below ,may result in eletric shock ,fire and / or serious personal injury. - Page 4 Power tool use and precautions 1. Do not abuse the power tool. Use the appropriate power tool according to the application. Selec- ting the power tool with the appropriate design rating will make your work more effective and safer 2. If the switch cannot turn the tool power on or off, the power tool cannot be used. The power tool that cannot be controlled by the switch is dangerous and must be repaired.
-
Page 5: Functional Description
2. FUNCTIONAL DESCRIPTION CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. SWITCH ACTION CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF"... - Page 6 Installing the connect shaft 1. Hex nut 2.Axle 3.Axle tube Screw the shaft into the shaft tube until the hexagon nut contacts the shaft tube 1. Wrench 2. Axle tube 3. Wrench Fix the axle tube with one wrench and tighten the hexagon nut with the other wrench in the direction of the arrow.
-
Page 7: Operation
Installing the back handle 1. Handle components. 2. Screw. Install the two handle components and screw them firmly. 3. OPERATION Mixing CAUTION Do not use for mixing combustible materials, such as for dilution。 It is a solvent paint, otherwise it may cause personal injury harm. -
Page 8: Maitenance
4. MAITENANCE CAUTION • Always be sure that the tool is switched off and unplugged before attempting to perform inspec- tion or maintenance. • Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. Replace carbon brush 1.Limit mark Remove and check the carbon brushes regularly.Replace when they wear down to the limit mark. -
Page 9: Technical Information
5. TECHNICAL INFORMATION Power: 1400 W No load speed: 800 rpm Mixing paddle diameter: 115 mm Mixing rod length: 580 mm Safe level: II Includes: Mixing rod 1 pc. Carbon brush 1 pair. Auxiliary handle 1 pc. 6. EXPLODED VIEW Drill chuck Screw M5x55 O ring 40... -
Page 11: Warranty
WARRANTY CARD Product model Date of sale Company Serial number Client's signature Username The product is in good conditions and fully complete. Read and agree the terms of the warranty. GUARANTEE The warranty period starts from the date of sale of the products and covers 6 months for all power products. During the warranty period, free failures caused due to the use of poor-quality materials in the production and manufacturer workmanship admitted fault are removed. - Page 12 Manufactured under license of Daewoo International Corporation, Korea...
Need help?
Do you have a question about the DAEM160L and is the answer not in the manual?
Questions and answers