Table of Contents
Advertisement
of the mixture. Otherwise, the drum will be damaged.
To clean it, turn the blender, pour into the drum of 10-20 liters of clean water and add some gravel.
Run the mixer for about a minute. Turn it off and drain the dirty water and gravel. Clean the blade with
a brush.
• Storage. Keep the mixer in a warm, dry place out of the reach of children.
At the end of the life of the instrument it must be disposed of in accordance with the rules, regulations
and procedures in the location where you are using the device
7. STRUCTURE AND COMPONENTS.
1. Wheel to tilt the drum.
2. Crown
3. Drum, upper feeding entrance.
4. Blade.
5. Motor housing.
6. Switch button.
7. Front wheels frame.
8. Wheel.
9. Beam.
10. Tilt drum locking pedal.
11. Support.
12. Lower drum.
13. Angle of the brake discs.
WARNING! Product appearance may vary slightly from that shown in the Fig. This is due to new
technical developments. We reserve the right to make changes to the tool without previous notice in
5
Advertisement
Table of Contents
