Environmental Requirements - ABB GLA131 Series User Manual

ABB GLA131 Series Microportable Analyzers

Environmental Requirements

Table 4 defines the environment requirements of the analyzer during operational
and non-operational conditions. Operation outside of these requirements may
cause damage to the analyzer.
Requirements
Operational Ambient
Temperature
Non-Operational
1
Temperature
Relative Humidity
To prevent damage to the analyzer, do not expose the analyzer to,
or use the analyzer in, rain or snow.
WARNING!
ABB does not endorse operation of any analyzer (including
MicroGuard™) not certified for operation in hazardous locations
CAUTION!
continuously in air that contains methane levels higher than the
lower flammability limit (LFL), where LFL for methane in air is 4.4%
or 44,000 ppm.
1 For maximum lithium-ion battery life and safety, the recommended storage temperature is between 4 °C to 25 °C
(40 °F to 77 °F).
ABB PROPRIETARY INFORMATION
Table 4: Environment Requirements
5 °C to 45 °C (41 °F to 113 °F)
4 °C to 50 °C (40 °F to 122 °F)
Below the dew point for the area, avoiding
condensation on surfaces
Specification
User Manual
16