AlphaLab Precis-Ion AIC3Pro Quick Start Manual page 11

3-in-1 Accessory:
Kickstand,
Tripod Mount,
or Wall Bracket
2
To use as a Tripod Mount:
The Combination
Accessory comes
with a standard
1/4" threaded
insert on the back
to mount on any
A.
Screw the tripod
removable plate
adapter into 1/4"
threaded insert
3
To use as a Wall Bracket:
Using included hardware:
A.
Mark and drill
4 holes in wall
C.
Align Combination Accessory
with plastic sleeved holes.
Screw 4 screws to wall, being
careful not to overtighten.
Need more Precis-Ion™ AIC3Pro accessories?
visit www.alphalabinc.com
1
Pull Out Kickstand
Rear View
tripod
B.
Clean holes and
tap in plastic
sleeves
To use as a Kickstand:
B.
Clip into
Tripod
Slide Meter
into Frame