Removing And Installing Ink Cartridges - Epson Stylus Scan 2500 User Manual

note:
If you've installed the
automatic document
feeder, remove it from
the EPSON Stylus
Scan, but don't
disconnect it from the
option interface.
Maintenance
122
If you need to replace an ink cartridge before you see a message
(because the ink is too old, for example) follow the instructions
in "Replacing an Outdated Ink Cartridge" on page 125.

Removing and Installing Ink Cartridges

You can replace a cartridge whenever you see a message that the
cartridge is low on ink or empty. (If you press the R cleaning
button before you see a message, the EPSON Stylus Scan cleans
the print head, as described on page 126.) Follow these steps:
1. Make sure the EPSON Stylus Scan is turned on and not
printing. Open the document cover, and then open the
maintenance cover. The internal cover opens automatically.
Maintenance
cover
Internal cover
Cleaning
button
2. Press the R cleaning button and hold it for about three
seconds until the print head moves left and the
light begins flashing.
Document cover
Operate